E1 interface |
4E1 interface for 4E1 |
E1 rate: 2.048Mb/s±50ppm |
Code type: HDB3 |
E1 comply with ITU-T G.703, G.7042 |
Jitter comply with ITU-T G.823 and G.742 |
E1 with DB37. Be able to be with 75Ω(BNC) or 120Ω(RJ45) by adaptor in the accessory |
Fiber |
Optical rate: 150Mbps |
Default: dual fiber, single mode, 40km |
Default connector: FC (SC/ST optional) |
Protection switch: 1+1 function optional |
Receiver sensitivity: -34dBm to -8dBm |
Ethernet
(optional) |
4 Ethernet ports with RJ45 connector |
MAC address table capability: 1024 |
MAC address table aging time |
The minimum frame length: 64bytes |
The maximum frame length: 1916 bytes |
Working mode: full/half duplex configurable |
Support VLAN, Stream control |
Bandwidth: 4 Ethernet ports shared 100M |
Orderwire phone
(optional) |
Standard 2-wire phone set |
Bandwidth: 64Kbps |
Coding: PCM |
Orderwire phone function optional |
Connector: RJ11 |
Indicator light |
F1,F2: the first or second fiber in use. (for the fiber 1+1 function) |
ALR: the general alarm for local and remote. |
NOP: no optical alarm |
LOF: Loss optical synchronous |
IE-3, IE-6: alarm for error code rate |
LOS1~LOS4 for 1~4E1: The reference E1 spur tack lose signal |
PLED1, PLED2: the two power indicator light |
ALARM/MUTE button for masking the sound |
Environment |
Power with 1+1 function |
AC&AC, DC&DC or AC&DC |
Operating temperature: -10~60°C |
Relative humidity≤95%(25℃) |
Relative humidity: 0~95%, noncondensing |